Benchtop Diode Drivers

  • Update:Apr 23, 2020
  • View:

MBL1500 controller series have special design for supply laser diode in butterfly package in both type 1 and type 2 14-pin laser diodes. Controller include high stability current source (0.01mА) for laser diode, TEC for precision maintaining the temp

We are promoting laser lamps, galvos, marking heads, green laser pointers etc till the stock is sold out. Pleasee click here.

Benchtop Laser Diode/TEC Controller STMBL1500A

STMBL1500A controller series have special design for supply laser diode in butterfly package in both Type 1 and Type 2 14-pin laser diodes. Controller include high stability current source (0.01mА) for laser diode, TEC for precision maintaining the temperature on peiltier element (TEM) (0.01 °C) and Mount with Azimuth ZIF socket for butterfly LD. These controllers are an excellent choice for laboratory test set-ups and has all the necessary protections for safe operation with laser diodes. These devices are an excellent choice for laser diode from II-VI Laser Enterprise, Eblana Photonics, 3SP Technologies, Furukawa, Lumentum inc and etc.

Features:

CURRENT, VOLTAGE & TEC CONTROLLER

Laser Diode Protection

PINOUT

DIMENSIONS AND WEIGHT

USER INTERFACE

INPUT

Benchtop Laser Controller STEM595

The STEM595 combines a laser driver and TEC controller into a compact, benchtop device with straightforward user interface. With 1.5A of drive current available, the controller can operate any Gooch and Housego 14-pin DFB laser or single mode laser.  The 3.0A of current available for the thermo-electric cooler provides ample control for typical room temperature environments. Precise temperature control results in accurate frequency control.  The STEM595 establishes a new level of low noise and linewidth performance in a benchtop device. The STEM750 and STEM650 OEM DFB modules should be considered for advanced noise and linewidth performance.

Features:

General Specifications

USB 2.0 Interface

Compliant with USBTMC/USBTMC-USB488 Specification Rev. 1.0

Interface Protocol

SCPI-Compliant Command Set

Supplied Drivers

VISA VXI pnp™, MS Visual Studio™, MS Visual Studio.net™, LabVIEW™, LabWindows/CVI™

 

Safety Features

Interlock, Keylock Switch, Laser Current Limit,  Soft Start,  Short Circuit when Laser Off, Laser Overvoltage Protection, Over Temperature Protection, Temperature Window Protection

Display

4.3" LCD TFT, 480 x 272 Pixels

Socket for Laser, Photodiode, NTC, TEC

Compatible with Butterfly Type 1 (Pump) and Butterfly Type 2 (Telecom)

Connector for Modulation Input

SMA

Connector for Interlock & Laser On Signal

2.5 mm Mono Phono Jack

Connector for USB Interface

USB Type Mini-B

Chassis Ground Connector

4 mm Banana Jack

Desktop Power Supply, Line Voltage, Line Frequency

100 to 240 V ±10%, 47 to 63 Hz

Maximum Power Consumption

40 W

Operating Temperature

0 to +40 °C

Storage Temperature

-40 to +70°C

Warm-up Time for Rated Accuracy

30 min

Weight

1.0 kg

Dimensions without Operating Elements (WxHxD)

111 mm x 73.5 mm x 152.6 mm (4.37" x 2.9" x 6.01")

Dimensions with Operating Elements (WxHxD)

111 mm x 73.5 mm x 169.2 mm (4.37" x 2.9" x 6.66")

Laser diode control specifications:

Temperature control specifications:

TEC Current Output:

NTC Thermistor Sensors

 Diode Laser Module,  Laser Diodes,  Laser Diode DriverBenchtop Diode Driver,  Mini OEM Diode DriversPulse Diode Driver

Share: